KRAUTKRAMER USM 36 FLAW DETECTOR FEATURES
Internal Memory – All models of the USM 36 can now store data in internal memory
API 5UE Sizing Option now Available
KRAUTKRAMER USM 36 FLAW DETECTOR BENEFITS
Largest Viewable A-Scan Display in its Class
Simple and Efficient Operation
Flexible Data Reporting and Storage
Comprehensive Connectivity
Can be Used in the Harshest of Environments
Available in Three Versions
KRAUTKRAMER 36 FEATURES
Large 7 inch screen, with an 800×480 pixel resolution
Signals easily viewed and accurately interpreted
Uses the familiar rotary knobs of previous models
Function keys minimized into a simple, intuitive 6-key keyboard
Set-up data is transferable directly from these instruments, which share the same user interface
Easy-to-interpret crispy A-scans
Data reporting includes screen shots and A-scan videos
All data stored on a removable SD-card and reports in jpeg or BMP format
VGA connection allows the instrument’s display to be shown on an external monitor
Fully protected against dust and water ingress to IP66
Can be operated in temperatures from -10°C to +55°C
Can be used in sandy deserts, frozen wastes and in the humid tropics
Weighs 2.2 kg and is battery or mains operated
Li-ion battery has life of more than 13 hours, with an integrated battery charger for those longer shifts
Versatile instrument is offered in three versions to meet the most standard inspection codes
The most advanced version can operate in DAC, AWS and DGS modes, features a powerful square wave pulser for excellent material penetration
Can accommodate GE’s patented trueDGS probe technology
Offers unrivaled accuracy in sizing of flaws using the DGS method, as well the patented Phantom Echo Detection technology
Specification GE Krautkramer USM 36
| Display | |
| Display Shift ( Delay) | –15 … 3,500 μs |
| Probe Delay | 0 … 1,000 μs |
| Velocity | 250 … 16,000 m/s |
| PRF | Automatically optimized 15 … 2,000 Hz, 3 automatic setting modes: Auto Low, Auto Med, Auto High, Manual |
| Display Screen | |
| Size Diagonal | 7″ |
| Active Range (W x H) | 152.4 × 91.44 mm2 |
| Resolution (W x H) | 800 × 480 pixels |
| Range | 4 … 14,108 mm (555“) for longitudinal wave |
| Connectors | |
| Probe Connectors | 2 × LEMO-1 or 2 × BNC |
| USB Interface | USB type B connector |
| Service Interface | LEMO-1B, 8 pin |
| Pulser | |
| Pulser Mode | Spike pulser, optionally: Square-wave pulser |
| Pulser Voltage (SQ Mode) | 120 … 300 V, in steps of 10 V with a tolerance of 10% |
| Pulser Falling/Rising Time | max. 10 ns |
| Pulser Width (SQ Mode) | 30 … 500 ns, in steps of 10 ns |
| Pulser Amplitude (Spike Mode) | low: 120 V, high: 300 V |
| Pulser Energy (Spike Mode) | low: 30 nS, high: 100 nS |
| Damping | 50 ohms, 1000 ohms |
| Receiver | |
| Digital Gain | Dynamic range 110 dB, adjustable in steps of 0.2 dB |
| Analog Bandwidth | 0.5 … 20 MHz |
| Equivalent Input Noise | <80 nV/√Hz |
| Filters | Broadband: 1-5 MHz / 2, 2.25 MHz / 4, 5 MHz / 10 MHz / 13, 15 MHz |
| Rectification | Positive half-wave, negative half-wave, full wave, RF signal |
| Gates | |
| Independent Gates | Gates A and B (triggering by gate A), Gate C (option, triggering by gate A or B) |
| Measurement Mode | Peak, Flank, J-FLANK, FIRST PEAK |
| Memory | |
| Card Slot | SD-card slot for all standard SD-cards |
| Capacity | 8 GB, SD-card |
| Datasets | UGO data structure in ASCII |
| Reports | JPG or BMP format |
| General | |
| Battery | Li-Ion, operating time: 13 hours with full charge Charging method (standard): internal with power adapter Charging method (optional): external charger Charge level: proportional charge level indicator |
| Power Adapter | Universal power supply unit 100 … 240 VAC, 50/60 Hz |
| Size (W x H x D) | 255 × 177 × 100 mm (10” × 7.0” × 3.9”) |
| Weight | 2.2 kg incl. battery |
| Languages | Bulgarian, Chinese, Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish |
| Damp Heat and Humidity (Storage) | EN 60068 Part 2-30 6 cycles: 9 hrs at +25°C up in 3 hrs to +55°C, 9 hrs at +55°C then down to +25°C in 3 hrs, at 93% humidity |
| Vibration | EN 60068 Part 2-6 2g per axis, 5 … 150 Hz, 1 oct/min, 25 cycles |
| Shocks | EN 60068 Part 2-27 1000 cycles per axis, 15 g, 11 ms, half-sine |
| Enclosure | IP66 according to IEC 60529 |
| Operating Temperature | –10 … 55°C |
| Cold Operation | –10°C for 16 hrs, 502.5 Procedure II |
| Heat Operation | +55°C for 16 hrs, 501.5 Procedure II |
| Storage Temperature | –20 … +60°C, without battery |
| Cold Storage | –20°C for 72 hrs, 502.5 Procedure I |
| Heat Storage | +70°C for 48 hrs, 501.5 Procedure I |
| Options | |
| AWS | AWS calibration tool, according to AWS D1.1 Structural Welding Code |
| DAC/JISDAC/CNDAC | DAC calibration tool, 16 points, according to EN 1712, EN 1713, EN 1714, ASTM E164, ASME, ASME III, JIS Z3060, GB11345 TCG: 120 dB dynamic, 110 dB/μs slope |
| DGS | DGS calibration tool, according to: EN 1712, EN 1713, EN 1714, ASTM E164 |
| Data logger | Grid file creation |
| 3G | Gate C |
| SWP | For pulser parameter optimization, voltage setting 120 … 300 V in steps of 10 V, pulse width setting 30 … 500 ns in steps of 10 ns |
| Phantom-PRF | Phantom-PRF for the identification of erroneous echoes caused by multiple reflections in low-attenuation materials |
| BEA | Blackwall Echo Attenuation |
Reviews
There are no reviews yet.