Topcon 3D-MC2 Machine Control System – Like New

$11.400

Included

* Topcon GX-60 Control Box [ID- X1860]
– 3DMC Version 11.1
– Serviced By A Topcon Authorized Service Center
* Topcon MC-R3 GPS Receiver [ID- X1861]
Main Board Options:
– GPS
– GLONASS
– L1
– L2
– Cinderella
– CDDB
– CDDR
– RTKB
– COOP
– EVNT
– AJM
– MPR
– RAIM
– DTM
– MAGN
– GEO
– WAAS
– CDIF
– CMRO
– CMRI
– CPH
– ETHR
– USB
– OCTO
– JPSO
– RM3I
– L2C
– DYNA
– DANT
Category: Tag:

Topcon 3D-MC2 Machine Control System

Topcon 3D-MC2 Machine Control System for sale.

Topcon  MCR3 with a Topcon GX-60 Control box. The Topcon MCR3 is a dual 915+ Radio with all software turned on, even MC2. GX-60 Has all machines turned on as well.

This is Topcon 3D-MC2 Machine Control Kit, and will work on multiple machines, not including the hydraulic valve or common kit. This equipment has been previously on rent or on demo and may show a little wear.  All equipment has been tested and is full functioning.

Topcon 3D-MC2 Machine Control Kit

Shatter the Final 3D Automation Production Barrier – Speed
Traditional finish grading with a dozer took multiple passes at slower speeds. Existing 3D-GPS machine control allowed operators to double their production. 3D-MC2 uses revolutionary technology to reach an unbelievable new level of performance: four times faster than a standard dozer, two times faster than any 3D dozer! One dozer doing the work of two 3D dozers; think of the money you will save.

More Efficient Use of your Machine
3D-MC2 will drastically change the role your dozer plays on a typical job site, in some cases it may even replace the need for a motor grader. It also means more efficient use of your dozer. Not only does speed increase, but fewer passes are needed, so more work can be done in less time. That means less machine operating time translating into less fuel, less wear on a machine and most importantly, more time that can be spent working in other areas or jobsites.

Improved Operator Performance
3D-MC2 is built on our same easy to use interface so your operators will have no problem putting it to work right away. As a matter of fact, with the advancements of 3D-MC2 your less experienced operators will be able to compete with even your most skilled operators. More for less, what could be better!

How it Works
3D-MC2 utilizes our Topcon’s GX-60 control box, GPS+ antenna, MC-R3 receiver and MC2 sensor and pairs them with advanced controlling software to provide position updates up to 100 times per second. The MC2 sensor combines a gyro, compass and inertial sensor to measure the X, Y and Z position as well as the roll, pitch, yaw and acceleration of the dozer. 3D-MC2 provides the most stable and responsive control system possible

The Topcon 3D-MC2 Advantage
Fine grading with a dozer has been typically done in first gear. Not anymore. Now you can move more material at higher speeds and at a tighter accuracy with one machine. That’s the Topcon advantage.

Features:

  • Increase speeds up to 200% over existing 3D systems
  • Smoothness and grading accuracy comparable to motor graders
  • Same easy-to-use interface as previous Topcon machine automation systems
  • Unmatched productivity that you will have to see to believe!

Specifications:

MC-R3 Controller
Supply Voltage Power Input: 10-30 VDC
Supply Current 3A typical operating current
Power Input 18.5A Max, 3mA at 24V typical leakage current 1.5mA at 12V
Housing Powder coated cast aluminum
Weight 7.5 lbs
Operating Temperature -20°C to +60°C
GX-60 Control Box
Display VGA full-color touch screen with enhanced brightness
Data/Memory Port USB, Ethernet, Bluetooth®
Operating System Windows XP®
Backlight Auto adjusting

Topcon 3D-MC2 Machine Control System for sale.

Reviews

There are no reviews yet.

Be the first to review “Topcon 3D-MC2 Machine Control System – Like New”

Your email address will not be published. Required fields are marked *

Name
Email
Phone
Enquiry