Pruftechnik Rotalign Touch EX


100% Authentic & International Factory warranty Guaranteed
Available in stock

Pruftechnik Rotalign Touch EX Laser Alignment System for sale

ATEX/IECEx Zone 1 certified including ruggedized IP68 tablet device

Single-laser technology sensALIGN 5 featuring SWEEP and PASS Mode for uncoupled shafts

Active Situational Intellgence

Simultaneous Horizontal and Vertical Live Move Move Simulator

Thermal growth and targets

Spacer coupling and in-situ Cardan shaft alignment with rotating arm bracket

Soft Foot Wizard to diagnose soft foot problems

6-machine train alignment

Advanced vertical machine alignment with vertiSWEEP continuous measurement mode

ALIGNMENT RELIABILITY CENTER 4.0 PC software including auto-activation and PDF reporting

Mobile connectivity with integrated Wi-Fi, Bluetooth, RFID and camera
Advanced laser shaft alignment in EX/ATEX areas

ROTALIGN touch EX is Zone 1 ATEX/IECEX certified. Packed with user-friendly alignment features unique to PRUFTECHNIK, the ROTALIGN touch EX shortens the measurement time with:

Continuous SWEEP Mode for high-quality measurement in only one shaft rotation
Live Move function for simultaneous real-time machine corrections in both horizontal and vertical directions
vertiSWEEP to measure vertical machines in one rotation of the shaft
Cardan shaft rotating-arm bracket allows measurements to be performed without removing the shaft
Soft Foot Wizard to diagnose soft foot problems
Move Simulator lets the operator simulate shim values and horizontal corrections before moving the machine

Have instant access to the critical data you need with full mobile connectivity. The ROTALIGN touch EX tablet is Wi-Fi enabled and equipped with a Bluetooth module, an integrated camera, and an RFID reader for automatic machine identification and error-free two-way transfer of asset data.

Direct communication between the tablet and the ALIGNMENT RELIABILITY CENTER 4.0 PC software allows specialists to archive, analyze, and process alignment data to improve asset performance improvement and reliability.

ROTALIGN touch EX device – updating procedure

Download and unzip the “rom” files on a PC
Please ensure the ROTALIGN touch EX device is charged or has at least 50% battery capacity
Switch on the ROTALIGN touch EX device and connect it to the PC. A hint to allow the Windows PC access to the device appears
On confirmation, the ROTALIGN touch EX device shows up on the File Explorer
Double-click “Tablet” to access folders on the ROTALIGN touch EX device
Transfer all unzipped “rom” files to the ROTALIGN touch EX device folder “FirmwareUpdate”
After all the “rom” files have been copied to the “FirmwareUpdate” folder, disconnect the ROTALIGN touch EX device from the PC
An on-screen message box “Firmware update in progress. Please wait” appears on the ROTALIGN touch EX device
Wait for the subsequent on-screen message box “Update available proceed with update” to appear.
Tap green tick button to proceed with the firmware update
Follow all the update instructions carefully, and confirm all requested installations
Once the firmware is completed, a hint to restart the ROTALIGN touch EX device appears
Press and hold down the power key briefly. “Power off” and “Restart” icons appear on the display
Tap “Restart”. The update is now completed and after restart may be checked and confirmed in the “About” menu item in configuration


There are no reviews yet.

Be the first to review “Pruftechnik Rotalign Touch EX”

Your email address will not be published. Required fields are marked *